Applying your DTF transfers shouldn’t feel like rocket science — and with the right settings, it isn’t. Follow these simple steps to get vibrant, long-lasting prints every time. No guesswork, no wasted blanks.
Step-by-Step Application
-
Pre-press your garment for 3–5 seconds to remove any moisture and wrinkles.
-
Position your transfer exactly where you want it.
-
Press using the correct time, temperature, and pressure (see material settings below).
-
Peel the carrier film hot — our transfers release quickly and cleanly.
-
Cover the design with your favorite cover sheet (Teflon or parchment paper).
-
Press again for 5 seconds to seal the print permanently.
-
Wait 24 hours before washing or stretching. Seriously — give it time to cure!
For Cotton, Blends & Most Fabrics
-
Temperature: 290°F
-
Time: 10–12 seconds
-
Pressure: Medium to High
For Polyester & Heat-Sensitive Materials
-
Temperature: 275°F
-
Time: 10–12 seconds
-
Pressure: Medium to High
Pro Tip
Every heat press behaves a little differently — adjust settings slightly if needed. Always test on a spare garment first. Better safe than sorry (and cheaper too).
Final Thoughts
Once you’ve got your settings dialed in, applying DTF transfers becomes second nature. Crisp details, vivid color, and durability — that’s what makes DTF a game-changer for custom printing.
Leave a comment
Write your comment here...